Anyone who knows me, knows that I have been clamouring for a pair of patio loungers for ever. In every single one of our previous summer patios, I have lobbied hard to get some, but each time I’ve been stymied by lack of space, lack of resources, or lack of time. But not this summer! This summer, we teamed-up with BEHR Paint to try our hand at DIY Patio Loungers. And by we I mean Dan made them and I painted them.
*BEHR Paint sponsored this post, but all thoughts are my own. Thank you for supporting the brands that make PMQ for two possible.
Bruce, as always, was on hand to model the patio loungers once they were done, but before we get to those I thought I’d share the plans and how we got there.
We used // these plans from Ana White //. As always, her designs are simple, functional and affordable. For each lounger you’ll need:
– 1 – 1×2 @ 8 feet long
– 1 – 2×2 @ 8 feet long
– 1 – set of hinges less than 1 1/2″ wide
– 1 – set of 3″ hinges